Plastic Pass (Threaded) Abot/Hydrant

Ozdoganplast plastic threaded hydrants (abots) are high-strength irrigation components developed to provide vertical outlets from sprinkler lines and integrate sprinkler heads into the system. Manufactured from 100% corrosion-resistant engineering polymers, these hydrants are much lighter than metal alternatives, minimizing mechanical stress on the main line. Precision threading ensures a leak-proof connection with sprinkler heads.

• Anti-Corrosive: Not affected by fertilizers or soil chemicals.
• Lightweight Design: Easy to transport and reduces main-line load.
• Precision Threading: Ensures perfect fitting with irrigation nozzles.

• Before assembly, check that the gasket grooves are clean and the gaskets are intact.
• When locking the pipes, ensure that the latches are fully engaged.
• In winter months, the system should be drained to prevent freezing, and pipes should not be left exposed to direct sunlight for extended periods (stacking rules must be followed).
• Appropriate Teflon tape must be used to seal threaded parts during assembly.
• Avoid overtightening, as this can deform the threads.

• Large-scale agricultural irrigation projects (corn, sugar beet, potatoes, etc.).
• Dust reduction and water transmission lines in mining areas.
• Temporary water transport systems and construction sites. Sprinkler outlets in sprinkler irrigation systems.
• Agricultural valve and hydrant connection points.
• Temporary water distribution lines.