|
Ürün Kodu Product Code |
Ürün Çapı Product Diameter |
|
|
mm |
inch |
|
|
50YD |
50 |
1 ½” |
|
63YD |
63 |
2” |
|
75YD |
75 |
2 ½” |
|
90YD |
90 |
3” |
|
110YD |
110 |
4” |
|
125YD |
125 |
5” |
|
140YD |
140 |
5 ½” |
|
160YD |
160 |
6” |
Used to perform 90-degree direction changes in sprinkler pipelines without leaks. Ozdoganplast latch-type elbows minimize pressure loss with an internal curve structure optimized against water hammer effects.
Flexibility: Flexible structure compatible with ground movements and terrain irregularities.
Sealing: 100% leak-proof at both low and high pressures thanks to specially designed EPDM gaskets.
Durability: High resistance to chemical fertilizers and abrasion.
As there is no water loss in the system, water is used to the maximum extent even in places where irrigation water is low (3.5 lt/sec). Irrigation can be carried out in places with a disturbed topography of the slope without causing erosion. Water; the soil, as it was in the rain fine particles is given in crop yield compared to other irrigation methods in 20-50% of an increase between provides and raises the quality. Eliminates the inability of the plant to rise above the soil due to the fact that the soil is skimmed at the time of seed germination. It is the most ideal irrigation system for low soil depth and (shallow) permeable soils. Especially near the sea, salt particles, dust and harmful pests left by wind-borne salt waters on plants can be washed away by sprinkling. Sprinkler irrigation is the most suitable irrigation method in places with high ground water (Drainage) problems, as it is possible to irrigate the area with irrigation.
It is used for irrigation of sloping plots, vineyards, gardens, vegetable citrus and other fruits.
Dust reduction systems are used in industrial plant production (potatoes, corn, cotton), orchards, temporary water transmission lines, and mining sites.
